亚洲AV永久无码精品成人调教,欧美多人顶级午夜寂寞影院

SCPS311 March 2026

ADVANCE INFORMATION

封裝選項

機械數據 (封裝 | 引腳)

DGS|24
- MPSS138

散熱焊盤機械數據 (封裝 | 引腳)

訂購信息

5.5 Electrical Characteristics

over operating free-air temperature range (unless otherwise noted)

PARAMETER			TEST CONDITIONS	V_CC	MIN	TYP	MAX	UNIT
V_IK	Input diode clamp voltage		I_I = –18mA		–1.2			V
V_PORR	Power-on reset voltage, V_CC rising		V_I = V_CC or GND, I_O = 0				1.35	V
V_PORF	Power-on reset voltage, V_CC falling		V_I = V_CC or GND, I_O = 0		1.05			V
V_OH	High-level output voltage	P Port	I_OH = -4mA	V_CC = 1.65V	1.27			V
			I_OH = -8mA	V_CC = 2.3V	1.73			V
				V_CC = 3V	2.4			V
				V_CC = 4.5V	4.0			V
				V_CC = 5.5V	4.95			V
			I_OH = -10mA	V_CC = 3.3V	2.53			V
				V_CC = 5V	4.3			V
				V_CC = 5.5V	4.85			V
		SDO	I_OH = -3mA		VCC - 0.4			V
V_OL	Low-level output voltage	P Ports	I_OL = 4mA	V_CC = 1.65V			0.24	V
			I_OL = 8mA	V_CC = 2.3V			0.36	V
				V_CC = 3V			0.25	V
				V_CC = 4.5V			0.17	V
				V_CC = 5.5V			0.15	V
			I_OL = 10mA	V_CC = 3.3V			0.40	V
				V_CC = 5V			0.33	V
				V_CC = 5.5V			0.32	V
		SDO	I_OL = 3mA				0.4	V
I_OL	Low-level output current	INT	V_OL = 0.4V		4			mA
I_I	Input leakage current	P Ports	V_I = V_CC or GND				±1	μA
		P Ports	V_I = 3.6V	V_CC = 0V			±1
		SDI, RESET	V_I = V_CC or GND				±1
		SCLK	V_I = GND				±1	μA
		SCLK	V_I = V_CC				±65	μA
		CS	V_I = V_CC				±1	μA
		CS	V_I = GND				±65	μA
I_CC	Quiescent current	Standby mode	SDI, CS and RESET = V_CC, P port = V_CC or GND, I/O = inputs, I_O = 0mA f_SCLK = 0MHz, –40°C < T_A ≤ 85°C, I/O resistors disabled	V_CC = 5.5V		2.3	8	μA
				V_CC = 3.6V		2	7.5	μA
				V_CC = 2.7V		1.8	7.2	μA
				V_CC = 1.65V to 1.95V		1.7	7	μA
			SDI, CS and RESET = V_CC, P port = V_CC or GND, I/O = inputs, I_O = 0mA f_SCLK = 0MHz, –40°C < T_A ≤ 125°C, I/O resistors disabled	V_CC = 5.5V		2.3	26	μA
				V_CC = 3.6V		2	24	μA
				V_CC = 2.7V		1.8	23.6	μA
				V_CC = 1.65V to 1.95V		1.7	23.4	μA
	Active current	Active mode (5MHz)	SDI, CS and RESET = V_CC, P port = V_CC or GND, I/O = inputs, I_O = 0mA f_SCLK = 5MHz, 100pF load on SDO –40°C < T_A ≤ 125°C, I/O resistors disabled	V_CC = 5.5V		150	170	μA
				V_CC = 3.6V		132	140	μA
				V_CC = 2.7V		127	135	μA
				V_CC = 1.65V to 1.95V		124	130	μA
		Active mode (10MHz)	SDI, CS and RESET = V_CC, P port = V_CC or GND, I/O = inputs, I_O = 0mA f_SCLK = 10MHz, 100pF load on SDO –40°C < T_A ≤ 125°C, I/O resistors disabled	V_CC = 5.5V		292	350	μA
				V_CC = 3.6V		257	285	μA
				V_CC = 2.7V		240	270	μA
				V_CC = 1.65V to 1.95V		242	260	μA
I_BHL	Bus-hold low sustaining current		Ramp V_I from 0 to 0.3 × V_CC	V_CC = 1.65V			42	uA
				V_CC = 2.3V			62	uA
				V_CC = 3V			82	uA
				V_CC = 4.5V			125	uA
I_BHH	Bus-hold high sustaining current		Ramp V_I from V_CC to 0.7 × V_CC	V_CC = 1.65V			-32	uA
				V_CC = 2.3V			-52	uA
				V_CC = 3V			-72	uA
				V_CC = 4.5V			-115	uA
I_BHLO	Bus-hold low override current		Ramp V_I from 0 to V_CC	V_CC = 1.95V	170			uA
				V_CC = 2.7V	260			uA
				V_CC = 3.6V	340			uA
				V_CC = 5.5V	500			uA
I_BHHO	Bus-hold high override current		Ramp V_I from V_CCto 0	V_CC = 1.95V	-170			uA
				V_CC = 2.7V	-260			uA
				V_CC = 3.6V	-340			uA
				V_CC = 5.5V	-500			uA
R_pu(int)	internal pull-up resistance	CS			70	100	140	kΩ
R_pu(int)	internal pull-up resistance	P port			70	100	140	kΩ
R_pd(int)	internal pull-down resistance	P port			70	100	140	kΩ
R_pd(int)	internal pull-down resistance	SCLK			70	100	140	kΩ
C_I	Input pin capacitance	SCLK	V_I = V_CC or GND				8	pF
		SDI					8	pF
		CS					8	pF
		RESET					8	pF
C_IO	Input-output pin capacitance	P port	V_IO = V_CC or GND				8.5	pF