UC19432-SP
- QML-V Qualified, SMD 5962-09233
- Rad Tolerant: 30 kRad(Si) TID(1)
- TID Dose Rate = 10 mRad/sec
- Programmable Transconductance for Optimum Current Drive
- Accessible 1.3 V precision Reference
- Both Error Amplifier Inputs Available
- 0.7% Overall Reference Tolerance
- 0.4% Initial Accuracy
- 2.4-V to 24-V Operating Supply Voltage and User Programmable Reference
- Reference Accuracy Maintained for Entire Range of Supply Voltage
- Superior Accuracy and Easier Compensation for Optoisolator Application
- Low Quiescent Current (0.5 mA Typ)
(1) Radiation tolerance is a typical value based upon initial device qualification. Radiation Lot Acceptance Testing is available – contact factory for details.
The UC19432 is an adjustable precision analog controller with 100-mA sink capability if the ISET pin is grounded. A resistor between ISET and ground will modify the transconductance while decreasing the maximum current sink. This will add further control in the optocoupler configuration. The trimmed precision reference along with the non-inverting error amplifier inputs are accessible for custom configuration. A sister device, the UC19431 adjustable shunt regulator, has an on-board resistor network providing six preprogrammed voltage levels, as well as exernal programming capability.
Limited design support from TI available
Existing projects using this product have limited design support from TI. If available, you will find relevant collateral, tools and software on this page. Existing designs using this product have limited design support from TI. Request limited design support in the TI E2E? support forums.
技術文檔
| 頂層文檔 | 類型 | 標題 | 格式選項 | 下載最新的英語版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 數據表 | Precision Analog Controller. 數據表 (Rev. A) | 2010年 7月 27日 | |||
| * | SMD | UC19432-SP SMD 5962-09233 | 2016年 7月 8日 | |||
| * | 輻射與可靠性報告 | UC19432-SP TID Report | 2015年 4月 27日 | |||
| 應用手冊 | 氣密性封裝回流焊曲線、端接鍍層以及引線裁切與成型 (Rev. A) | PDF | HTML | 英語版 (Rev.A) | PDF | HTML | 2025年 11月 20日 | |
| 應用簡報 | 經 DLA 批準的 QML 產品優化 (Rev. C) | PDF | HTML | 英語版 (Rev.C) | PDF | HTML | 2025年 8月 18日 | |
| 應用手冊 | 重離子軌道環境單粒子效應估算 (Rev. B) | PDF | HTML | 英語版 (Rev.B) | PDF | HTML | 2025年 7月 7日 | |
| 選擇指南 | TI Space Products (Rev. K) | 2025年 4月 4日 | ||||
| 更多文獻資料 | TI Engineering Evaluation Units vs. MIL-PRF-38535 QML Class V Processing (Rev. B) | 2025年 2月 20日 | ||||
| 應用手冊 | QML flow, its importance, and obtaining lot information (Rev. C) | 2023年 8月 30日 | ||||
| 應用手冊 | 單粒子效應置信區間計算 (Rev. A) | PDF | HTML | 英語版 (Rev.A) | PDF | HTML | 2022年 12月 2日 | |
| 電子書 | 電子產品輻射手冊 (Rev. B) | 2022年 5月 7日 | ||||
| 應用手冊 | DLA Standard Microcircuit Drawings (SMD) and JAN Part Numbers Primer | 2020年 8月 21日 | ||||
| 電子書 | 電子產品輻射手冊 (Rev. A) | 2019年 5月 21日 |
設計與開發
如需其他信息或資源,請點擊以下任一標題進入詳情頁面查看(如有)。
PSPICE-FOR-TI — PSpice? for TI 設計和仿真工具
借助?PSpice for TI 的設計和仿真環境及其內置的模型庫,您可對復雜的混合信號設計進行仿真。創建完整的終端設備設計和原型解決方案,然后再進行布局和制造,可縮短產品上市時間并降低開發成本。?
在?PSpice for TI 設計和仿真工具中,您可以搜索 TI (...)
| 封裝 | 引腳 | CAD 符號、封裝和 3D 模型 |
|---|---|---|
| CDIP (JG) | 8 | Ultra Librarian |
訂購和質量
- RoHS
- REACH
- 器件標識
- 引腳鍍層/焊球材料
- MSL 等級/回流焊峰值溫度
- MTBF/時基故障估算
- 材料成分
- 鑒定摘要
- 持續可靠性監測
- 制造廠地點
- 封裝廠地點